3D Models

Screw Shelving System

Bill of Materials:

  • 20mm wooden dowel rod.
  • 18mm thickness wood.

 

These Model is under the Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0) licence.

(Downloads - 32)

3D Printable Shelving System – Description

We all know that 3d printing is fantastic. However, we also know that it is quite slow. For that reason I always think about using materials available at any hardware store to make the printing process as short as possible. But at the same time obtain a satisfactory result in the design. This 3D Printable Screw Shelving System, like almost all our models, is easy to print. Being that you don’t need supports or special materials to print it.

Likewise, you can print it without a hotbed. You can turn your weekend in a DIY adventure with this project. Here you can find a 27mm and 28mm version. Which you can also download. We wish you a Happy printing!

3D Printable Shelving System Printing Settings:


Material: PLA or PLA+
Raft: No
Supports: No
Resolution: 0,35 mm
Hot Bed Temperature: 0 °C
Infill: 45 %
Top Layers: 3
Bottom Layers: 3
Walls: 3
Speed: 40 mm/s

If you like our 3D Models please consider making a donation. Thank you!

Do you want to use our design for commercial purposes or adapt our models to your specific needs? Simply write us at info at churuata3d.com.

These Model is under the Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0)licence.