3D Models

Wall Hanger

Bill Of Materials:

  • Wood 18mm x 200mm x
  • (2) Wall screws.
  • (2) Wall plugs.
  • (5) Wood screews.

 

These Model is under the Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0) licence.

(Downloads - 46)

3D Printable Wall Hanger – Description

We want to share this simple 3D Printable Wall hanger. This design has 3 hook. Which is ideal for Children’s room or the office. So, we recommend print more than one hanger in different colors, add a wood board as shown in the photos and fix it in the wall. This is a simple DIY job. Therefore, you can do it in a couple of hours. So, maybe your son take a part too! Since children really like DIY. We used PLA to print these model, but you can use PLA+ too. The most important is to print slow,  the slower you print more rigid will be the piece.

In addition, you can find a 2 hook Hanger or Towel Hanger to download too. We wish you a Happy printing!

3D Printable Wall hanger Printing Settings:


Material: PLA or PLA+
Raft: No
Supports: No
Resolution: 0,35 mm
Hot Bed Temperature: 0 °C
Infill: 20-30 %
Top Layers: 2
Bottom Layers: 2
Walls: 3
Speed: 40 mm/s

If you like our 3D Models please consider making a donation. Thank you!

Do you want to use our design for commercial purposes or adapt our models to your specific needs? Simply write us at info at churuata3d.com.

These Model is under the Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0)licence.